DGIST film cools an electronic device by 18.2 °C using only air humidity, in lab tests
Korean researchers made a flexible nanocellulose film that cooled a surface from 72.3 to 54.1 °C by evaporating absorbed moisture, with no electricity supplied.

Researchers at the Daegu Gyeongbuk Institute of Science and Technology (DGIST) in South Korea have developed a flexible film that cools electronic surfaces using only moisture from the air, according to invdes.com.mx. In tests it lowered the temperature of a device from 72.3 °C to 54.1 °C, a drop of 18.2 °C, and the effect lasted more than 12 hours under the conditions tested invdes.com.mx
invdes.com.mxinvdes.com.mxOpen source ↗. The film needs no fans, pumps or external water supply.
How the film works
The film relies on evaporative cooling: water absorbs thermal energy as it passes from liquid to vapor. The material contains a nanocellulose structure that retains moisture and ionic organic molecules that promote absorption of atmospheric water vapor.
While the device is cold, the film takes up moisture from the air and stores it. When the device starts running and heats up, part of that moisture evaporates and removes heat from the surface. The device's own heat therefore drives the process, and no electricity is supplied to the material. The film does not generate cold; it helps transfer thermal energy to the surrounding air.
Flexibility, adhesion and corrosion
Many materials that absorb large amounts of moisture are relatively rigid crystalline solids. They fit irregular surfaces poorly and make poor thermal contact. Moisture near metal parts can also promote corrosion invdes.com.mx
invdes.com.mxinvdes.com.mxOpen source ↗.
The team led by Professor Seong Kyun Kim reports that its film stays flexible and adhesive even when completely dry. This lets it stay in contact with metal, glass and semiconductor surfaces without gaps that would impede heat transfer. According to the researchers, it did not cause corrosion under the conditions studied.
Limits of the result
Evaporative cooling depends on relative humidity, ambient temperature, ventilation and the amount of water the film can store. The 18.2 °C reduction therefore does not apply to every device in every condition, and the work does not show that the film can replace conventional cooling.
Open questions include how many absorption and evaporation cycles the film withstands without losing effectiveness, and how it performs when ambient humidity is too low to replenish the evaporated water. Applications such as data center servers, electric vehicle batteries and phones would also need durability and compatibility tests invdes.com.mx
invdes.com.mxinvdes.com.mxOpen source ↗.
The work was led by Hyeondo Kim under the direction of Seong Kyun Kim and was published in September 2026 in the journal Small Structures.



