Planet › Earth3 min read

Brixton Metals: hole at Langis Shaft 4 cuts 142,770 g/t silver over 0.30 m, drilling continues

Brixton Metals reported a new silver zone at Shaft 4 in Ontario's Cobalt district; the company calls it the highest-grade intercept at Langis. True widths are not yet determined.

Brixton Metals: hole at Langis Shaft 4 cuts 142,770 g/t silver over 0.30 m, drilling continues
Photo: redimin.cl

Brixton Metals reported a new silver zone in the Shaft 4 area of its Langis project, in the historic Cobalt mining district, Ontario, according to redimin.cl redimin.clredimin.clredimin.clOpen source ↗. The first hole drilled there, LM-26-477, intersected 142,770 g/t silver over 0.30 m, within a 3.0 m interval averaging 14,558.9 g/t. The company describes it as the highest-grade intersection drilled at the project so far.

A follow-up hole, LM-26-480, cut 5.0 m at 704.49 g/t silver, including 1.4 m at 2,478.93 g/t and a 0.40 m subinterval at 6,460 g/t. The intervals are core lengths; Brixton said true widths have not yet been determined.

Shaft 4: geology and target

The holes found native silver in veins in the upper part of the Huronian conglomerate. The first interval in LM-26-477 starts at 68.5 m drilling depth, and the company places the mineralization at an approximate vertical depth of 50 to 55 m. The highest-grade sample, 142,770 g/t, came from 70.0 to 70.3 m down the hole. Shaft 4 has no historical mine workings, and Brixton had not drilled the area before this campaign.

Most of the known mineralization at Langis lies at the lower contact of the conglomerate, near the Huronian unconformity. The new intercepts are in the upper section, so the company is also drilling toward the lower contact beneath the veins. Whether that deeper zone is mineralized remains to be tested redimin.clredimin.clredimin.clOpen source ↗.

Brixton chose the target from a high-resolution gravity anomaly whose geometry and geophysical response resemble those at Shaft 6. The company cautions that this similarity does not prove equivalent mineralization. At Shaft 4 the silver is mainly native, locally associated with arsenic and nickel minerals.

Other results and caveats

Brixton also reported 28 holes totaling 6,741 m at Shaft 6 South East, Shaft 6, Shaft 6 West and Shaft 3 East. At Shaft 3 East, LM-26-462 cut 4.0 m at 424.5 g/t silver from 153 m. At Shaft 6 South East, LM-26-457 returned 7.0 m at 135.47 g/t from 208 m, including 4.5 m at 205.11 g/t. At Shaft 6 West, LM-26-410 intersected 4.0 m at 159.2 g/t from 127 m, including 2.0 m at 247 g/t. Seven holes at Shaft 6 South East, three at Shaft 6, two at Shaft 6 West and four at Shaft 3 East had no significant intercepts.

Assay values are weighted averages; composites use contiguous samples, a 5 g/t silver cutoff and limited internal dilution. Section symbols and envelopes are visual aids, not a geological model, resource or reserve. Several additional Shaft 4 holes reportedly intersected visible silver, but those results await laboratory validation.

In 2026 Brixton has completed 49,946.55 m in 234 holes at Langis, working toward a first mineral resource estimate redimin.clredimin.clredimin.clOpen source ↗. On 13 November it closed a CAD$7.16 million private placement intended mainly for exploration and drilling at Langis and Thorn.

Sources · 1

Found a mistake?
  1. ↩

Read also

Up next

The next story opens automatically

More
Follow us

Type at least two letters — results appear instantly

↑↓to choose↵to openescto close