Power › Batteries2 min read

MoS2 anode bonded to nitrogen-doped carbon via Mo–N keeps ~100% capacity over 800 cycles in lab cells

Researchers chemically bonded MoS2 to nitrogen-doped carbon with a CTAB surfactant; lab lithium-ion supercapacitors reached 3500 W kg−1 and ran 10,000 cycles.

MoS2 anode bonded to nitrogen-doped carbon via Mo–N keeps ~100% capacity over 800 cycles in lab cells
Photo: Chingo K, Wikimedia Commons, CC BY 4.0 · License: CC BY 4.0

A research team has reported a way to chemically bond layered molybdenum disulfide (MoS2) to nitrogen-doped carbon and use the result as an anode in lithium-ion batteries and lithium-ion supercapacitors. The work was published in Nano-Micro Letters (DOI 10.1007/s40820-026-02324-3) on 23 August 2026. In laboratory tests the optimized electrode, MoS2–N–C700, showed about 100% capacity retention after 800 cycles at 0.5 A g−1 springer.comNano-Micro Lettersspringer.comOpen source ↗.

Layered transition-metal dichalcogenides such as MoS2 are promising for lithium storage, but they are limited by low electrical conductivity, slow lithium-ion diffusion and structural degradation during cycling. In conventional MoS2/carbon composites the two components often touch only physically, and such interfaces can degrade during repeated lithiation and delithiation, according to the release accompanying the paper.

Surfactant route to Mo–N bridges

The authors used a quaternary ammonium surfactant, cetyltrimethylammonium bromide (CTAB), as both carbon precursor and nitrogen source. During thermal treatment CTAB turns into nitrogen-doped carbon layers, and Mo–N bonds form in situ at the MoS2–carbon interfaces. Decomposition of the surfactant also produces mesopores, giving a porous, chemically integrated heterostructure.

The authors report that the Mo–N bridges serve as electron pathways and as structural anchors. The interlayer spacing of MoS2 expanded from 0.622 to 0.633 nm. The sulfurization temperature was tuned to balance MoS2 crystallinity, carbon content and interfacial bonding strength springer.comNano-Micro Lettersspringer.comOpen source ↗.

Battery and supercapacitor results

The MoS2–N–C700 anode showed discharge capacity rising from 539.2 to 625.9 mAh g−1 over 800 cycles at 0.5 A g−1, with Coulombic efficiency close to 100%. The authors also report good rate capability and stable cycling at higher current densities.

In lithium-ion supercapacitors with activated carbon as the counter electrode, the device delivered 175 Wh kg−1 at 129.2 W kg−1. It kept 80 Wh kg−1 at a power density of 3500 W kg−1 and retained 78.2% of its initial capacitance after 10,000 cycles at 1 A g−1.

The authors state that the cycling performance in both device types exceeds that of most previously reported MoS2/carbon nanocomposites and conventional carbon-based anodes. They describe the surfactant-derived bridging approach as a general platform for transition-metal dichalcogenide/carbon electrodes. The results were obtained on laboratory electrodes and cells springer.comNano-Micro Lettersspringer.comOpen source ↗.

Sources · 2

Found a mistake?
  1. ↩

Read also

Up next

The next story opens automatically

More
Follow us

Type at least two letters — results appear instantly

↑↓to choose↵to openescto close