Digital › Connectivity2 min read

Bluetooth SIG adopts HDT in Core 7.0: LE speed rises from 2 to 7.5 Mbps, devices due from 2027

The Bluetooth SIG added High Data Throughput to Core 7.0 on 4 November 2026. It requires new radio hardware at both ends, and first products are expected from 2027.

Bluetooth SIG adopts HDT in Core 7.0: LE speed rises from 2 to 7.5 Mbps, devices due from 2027
Photo: ecosistemastartup.com

According to ecosistemastartup.com, the Bluetooth Special Interest Group (SIG) adopted a feature called High Data Throughput (HDT) within Bluetooth Core 7.0 on 4 November 2026. With it, the maximum speed of Bluetooth Low Energy (LE) rises from 2 Mbps to 7.5 Mbps ecosistemastartup.comecosistemastartup.comecosistemastartup.comOpen source ↗. The 2 Mbps rate dates back to Bluetooth 5.0 in 2016. The SIG expects the first compatible products from 2027.

Physical layer and requirements

The increase does not come from additional spectrum. HDT introduces a new physical layer (PHY) in the same 2.4 GHz band. According to audioXpress, it uses the modulation schemes π/4 QPSK, 8PSK and 16QAM combined with forward error correction (FEC).

HDT defines five rates: 2, 3, 4, 6 and 7.5 Mbps. The first three are mandatory for any HDT device, while 6 and 7.5 Mbps are optional, and a device that supports 7.5 Mbps must also support 6 Mbps. A product can therefore carry the "Bluetooth 7" label without HDT, or support HDT only up to 4 Mbps.

HDT does not arrive through a firmware update: it requires a new radio architecture, and both ends of the connection must support it ecosistemastartup.comecosistemastartup.comecosistemastartup.comOpen source ↗. Qualcomm announced the FastConnect 8800 chip at MWC 2026, described as the first mobile chip with Wi-Fi 8 and Bluetooth 7 support, according to Android Headlines. Realtek showed its RTL8773J audio SoC with HDT at COMPUTEX 2026, and Ceva is working with Actions Technology on the ATS296X family.

Audio, codec and limits

Today, high-resolution audio over Bluetooth relies on proprietary technologies such as Sony's LDAC or Qualcomm's aptX Lossless. Android Authority notes that typical wireless streams run from 200 kbps to slightly over 1 Mbps. The same publication calculates that 16-bit/44.1 kHz audio needs about 1.4 Mbps, 24-bit/96 kHz about 4.6 Mbps, and 24-bit/192 kHz about 9.2 Mbps, the last reachable only with efficient lossless compression.

HDT is only a transport layer, and audio also needs a codec. LC3, the default LE Audio codec, was designed for low power consumption and is lossy. The SIG has a lossless high-resolution codec project under way, with formal interoperability tests planned for March 2027 and a possible final specification later in 2027. The technology under evaluation has not been publicly confirmed.

The SIG points to wearables, virtual and augmented reality glasses, and smart home devices. Damon Barnes, the SIG's technical marketing director, told CNET that a smartwatch could sync hours of training data in seconds ecosistemastartup.comecosistemastartup.comecosistemastartup.comOpen source ↗. HDT does not improve range or sensor accuracy, does not help devices that send little data, such as heart-rate straps, and does not speed up pairing, since the first version does not change device advertising.

Sources · 1

Found a mistake?
  1. ↩

Read also

Up next

The next story opens automatically

More
Follow us

Type at least two letters — results appear instantly

↑↓to choose↵to openescto close