# UNIST nickel catalyst decomposes 95.5% of ammonia at 550 °C and holds activity for 100 hours

- Published: 2026-11-16 04:08 UTC
- Section: Science › Chemistry
- Tags: ammonia decomposition, nickel catalyst, hydrogen carrier, UNIST, ruthenium replacement, layered double hydroxide, chromium nickel electron transfer, Advanced Science
- URL: https://realtech.media/news/rt-c8db365fe7200549e2b61cb3_unist_nickel_catalyst/

**Korean researchers at UNIST built a nickel-chromium-aluminum catalyst for extracting hydrogen from ammonia, replacing costly ruthenium. In lab tests it kept its performance for 100 hours at 525 °C.**

![UNIST nickel catalyst decomposes 95.5% of ammonia at 550 °C and holds activity for 100 hours](https://realtech.media/media/2026/11/ebf7d4a468ffc7d8.jpg)
*ENERGY.GOV, Wikimedia Commons, Public domain*

A research team at the Ulsan National Institute of Science and Technology (UNIST) has developed a nickel-based catalyst for efficient hydrogen extraction from ammonia, according to news1.kr. The group of Prof. Seungho Cho (Department of Materials Science and Engineering) worked with Dr. Hongdae Kim of the Korea Institute of Industrial Technology and Prof. Mingyu Kim's team at Yeungnam University. The work was announced on 16 November [1].

Ammonia is considered a hydrogen carrier: it liquefies more readily than hydrogen and can use existing transport and storage facilities. Hydrogen is converted to ammonia, shipped, and then decomposed again where it is needed. The new catalyst uses relatively cheap nickel instead of expensive ruthenium, the authors report [1].

## Performance figures

At 550 °C the catalyst decomposed 95.5% of the ammonia supplied. A control sample made of nickel alone showed a decomposition rate below 10% at the same temperature [1].

In a durability test at 525 °C the catalyst maintained its ammonia decomposition performance for 100 hours [1].

## Mechanism and synthesis

The design makes chromium donate electrons to nickel. Nickel that receives electrons helps break the bond between nitrogen and hydrogen in ammonia. It also binds the resulting nitrogen more weakly, so nitrogen gas leaves the nickel surface more easily [1].

According to the researchers, X-ray and electron microscopy analysis confirmed electron transfer from chromium to nickel. An analysis of the energy needed for nitrogen to detach from the surface also supported this mechanism. Aluminum, present as an oxide, supports the nickel particles and prevents them from agglomerating at high temperature [1].

The catalyst is made from a layered double hydroxide (LDH) as the starting material. Nickel, chromium and aluminum are mixed uniformly at the atomic level to form the LDH, which is then oxidized by heat treatment and subsequently reduced [1].

The authors said the approach may help lower the cost of producing hydrogen from ammonia by reducing the use of precious metals, and that it could improve other energy and environmental catalysts. The study was published on 7 October in Advanced Science. Co-first authors are Donghyuk Kim (UNIST), Sujin Kim (Korea Institute of Industrial Technology) and Gayoung Kim (Yeungnam University) [1].

## Sources

1. [news1.kr](https://www.news1.kr/local/ulsan/6355078)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-c8db365fe7200549e2b61cb3_unist_nickel_catalyst/
