# Songshan Lake Materials Laboratory: rotating-field annealing gives Fe-based alloys 1–5 nm grains and Bs of 1.94 T

- Published: 2026-11-16 04:35 UTC
- Section: Machines & Making › Materials science
- URL: https://realtech.media/news/rt-a1e446a924cb405e53c69eed_songshan_lake_materials/

**Researchers annealed Fe-(Co)-Si-B-Cu-Nb and Fe-Co-B-P alloys in a rotating magnetic field and obtained a saturation flux density of 1.94 T with a coercivity of about 0.8 A/m.**

![Songshan Lake Materials Laboratory: rotating-field annealing gives Fe-based alloys 1–5 nm grains and Bs of 1.94 T](https://realtech.media/media/2026/11/19318c7cad6a125d.jpg)
*Cambridgeshire County Council, Helen Fowler, 2014-01-16 14:29:29, Wikimedia Commons, CC BY-SA 4.0*

A team from Songshan Lake Materials Laboratory in Dongguan, China, working with the Dongguan Institute of Materials Science and Technology, the Institute of Physics of the Chinese Academy of Sciences, City University of Hong Kong and Central South University, has described a way to control crystallization in soft magnetic alloys. The study was published in Nature Communications on 14 November 2026. The authors annealed Fe-(Co)-Si-B-Cu-Nb and Fe-Co-B-P alloys in a rotational magnetic field and obtained fine nanocrystalline structures with grain sizes of 1–5 nm. The alloys reached a saturation magnetic flux density (Bs) of 1.94 T and a coercivity (Hc) of about 0.8 A/m [1].

## The Bs and Hc trade-off

Soft magnetic materials are used in power electronics, and demand for efficient devices in areas such as 5G keeps growing. According to the authors, progress is limited by an intrinsic trade-off: a high Bs usually comes with a higher Hc, and a low Hc with a lower Bs [1]. The reported combination of 1.94 T and about 0.8 A/m is presented as a result achieved despite this trade-off.

## Rotating field and nucleation

The method starts from amorphous precursors. The authors report that the applied rotational magnetic field promotes dynamic structural fluctuations in them. This enhances nucleation while suppressing grain growth, which yields grains of only 1–5 nm [1].

Molecular dynamics simulations were used to examine the mechanism. They show that rotational magnetic fields generate spatially heterogeneous fluctuations, which facilitate dense and uniform nucleation [1]. The authors describe this as the basis of the fine structure observed in both alloy families.

The work covers two compositions: an Fe-Si-B-Cu-Nb alloy with optional cobalt, and an Fe-Co-B-P alloy. In the authors' words, the study provides a pathway for designing fine nanocomposite soft magnetic materials through external-field-controlled crystallization [1]. The material gives no data on production scale or on devices built from these alloys.

## Sources

1. [Nature Communications](https://doi.org/10.1038/s41467-026-79233-x)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-a1e446a924cb405e53c69eed_songshan_lake_materials/
