# TORSA's CMS collision-prevention system passes TRL4 tests at University of Pretoria for open-pit mining

- Published: 2026-11-16 21:36 UTC
- Section: Power & Energy › Transport
- Tags: TORSA CMS, collision prevention system, open-pit mining safety, TRL4 tests, University of Pretoria, ISO/TS 21815-2:2021, MOSH criteria, high-precision GPS, mine vehicle braking, TRL7 and TRL9
- URL: https://realtech.media/news/rt-7d6aa3a0689fcc3a1afd357e_torsa_s_cms/

**Tests under ISO/TS 21815-2:2021 covered six blocks, and TORSA reports all were passed. Validation in real operation at TRL7 and TRL9 is still ahead.**

![TORSA's CMS collision-prevention system passes TRL4 tests at University of Pretoria for open-pit mining](https://realtech.media/media/2026/11/d70eeb54a255d7e1.jpg)
*redimin.cl*

Spanish company TORSA passed TRL4 tests for collision warning and prevention systems in open-pit mining in May 2026. The tests were carried out by the University of Pretoria in South Africa, according to redimin.cl [1]. The company states that its CMS is the second solution in the world to pass this stage of evaluation [1].

The tests followed ISO/TS 21815-2:2021 and criteria published by MOSH, an occupational safety and health initiative of the mining industry. TORSA says its solution passed all trials in the evaluated blocks; the available information gives no scores or numerical performance margins [1].

## Test scope and procedure

The process begins with simulations to verify compliance with the ISO specification, followed by field tests with vehicles and operating situations. The review covered six blocks: interface, system logging, self-diagnostics, detection, warning and controller [1]. According to the company, each critical subsystem was validated independently, rather than the CMS being evaluated as a closed box. TORSA notes that even deviations in response times can be penalised [1].

In the field, the trials included parking maneuvers with up to six vehicles around, driving in zones with a speed limit of up to 40 km/h, and preventing entry into restricted areas. They also covered straight and curved crossings and intersections where the system had to recognise priority as other vehicles approached [1]. The task was to avoid both collisions and unnecessary alerts that could distract the operator.

## Challenges and next stages

TORSA names two main challenges. The first was detecting moving and static objects accurately under varied circumstances and environmental conditions; the company says it combined sensor technologies, including high-precision GPS [1]. The second was defining how braking should intervene: it had to protect the operator while avoiding damage or excessive wear to components such as suspension, brakes and tyres [1].

The available material does not publish detection ranges, error rates, response times, wear measurements or cost comparisons. It also contains no safety or productivity data from a mine in operation [1].

TRL4 is a technical validation stage and does not demonstrate sustained performance in a real mining operation. TORSA says its next steps are TRL7 and TRL9 tests, to evaluate the technology in operating conditions and demonstrate its performance in the field [1].

## Sources

1. [redimin.cl](https://www.redimin.cl/torsa-supera-pruebas-de-colision-minera-en-sudafrica-pero-aun-falta-la-validacion-en-faena)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-7d6aa3a0689fcc3a1afd357e_torsa_s_cms/
