# ZF shows a 30,000 rpm electric drive prototype with 200 kW peak output on a test bench

- Published: 2026-11-16 17:39 UTC
- Section: Power & Energy › Electric motors
- Tags: ZF electric drive, 30,000 rpm motor, high-speed e-motor, two-stage gearbox 18:1, 200 kW peak power, 3,500 newton-metres, reduced magnet mass, electric car powertrain, ZF E-Mobility
- URL: https://realtech.media/news/rt-74cf4893953e48afcd205013_zf_shows_a/

**ZF's prototype drive spins its motor at up to 30,000 rpm versus 18,000 in a compact reference drive; by ZF's figures it needs half the magnet mass.**

![ZF shows a 30,000 rpm electric drive prototype with 200 kW peak output on a test bench](https://realtech.media/media/2026/11/7fdaea9cf52d2519.webp)
*futurezone.de*

The German automotive supplier ZF, based in Friedrichshafen, has presented an electric drive whose motor rotates at up to 30,000 rpm, according to futurezone.de [1]. That is almost twice the speed of conventional systems. The prototype has been running on a test bench since February 2026 [1]. No electric car uses the drive yet.

## Principle and figures

At equal power, a faster motor has to deliver less torque at the shaft. Torque is tied to rotor size, so the motor can be smaller and lighter. To keep enough force at the wheel, ZF places a two-stage gearbox with a ratio of about 18:1 behind it [1]. The drive reaches a peak power of 200 kilowatts and a torque of 3,500 newton-metres at the wheel [1].

"We do not optimise individual components in isolation, but consistently match the electric machine, power electronics and gearbox to each other," said Thomas Meiser, head of the E-Mobility business unit at ZF, in a press release [1].

ZF states its advantages against an already compact standard drive with the same output data and 18,000 rpm. According to ZF, the new drive needs nearly 25 percent less installation space, weighs 25 percent less and gets by with half the magnet mass [1]. ZF says this could let manufacturers cut costs and reduce supply-chain dependencies. In power, it is expected to keep up with the reference drive, so the main gain for manufacturers is the freed space: an electric car could be designed more freely without losing output.

## Load, noise and timeline

High speeds put more stress on the rotor, bearings and gearing, and at the same time increase noise. Meiser stressed that robustness and low noise and vibration levels were hard development goals from the start [1]. ZF adapted the tooth geometry and the housing for this. Whether the acoustics will hold up in the planned large-scale production has not yet been demonstrated [1].

ZF says it is already in talks with numerous automakers and names a planned series start by 2030 [1]. Whether the benefits reach end customers will also depend on how carmakers set their prices.

## Sources

1. [futurezone.de](https://www.futurezone.de/produkte/article763510/elektroautos-deutscher-hersteller-stellt-erstaunlichen-neuen-antrieb-vor-er-bringt-einige-vorteile-automobilzulieferer.html)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-74cf4893953e48afcd205013_zf_shows_a/
