# EPFL prototype robot elephant with a lattice trunk made of one material varies stiffness from 20 to 280 kPa

- Published: 2026-11-16 14:23 UTC
- Section: Machines & Making › Robots
- Tags: robot elephant EPFL, soft-rigid robot, lattice geometry, variable stiffness, single material robot, tendon-driven robot, Josie Hughes, Science Advances
- URL: https://realtech.media/news/rt-6f3eb333554d84a29b3e92a3_epfl_prototype_robot/

**EPFL researchers built a tendon-driven robotic elephant prototype. Its lattice geometry sets local stiffness, from tissue-like to bone-like, within a single material.**

![EPFL prototype robot elephant with a lattice trunk made of one material varies stiffness from 20 to 280 kPa](https://realtech.media/media/2026/11/e4cdf4a8e3c82fe7.webp)
*science-et-vie.com*

Researchers at the École polytechnique fédérale de Lausanne (EPFL), in the group of Josie Hughes, have described in Science Advances a method for designing soft-rigid robotic structures from lattice geometries made of a single material [1]. As a demonstrator, they fabricated a tendon-driven robotic elephant prototype modeled on a musculoskeletal system [1].

## Lattice geometry sets stiffness

The authors propose new ways to design the unit cells of a lattice, based on continuous blending and superposition of existing lattice geometries. This allows them to tune stiffness and anisotropy precisely [1]. The resulting three-dimensional structures have spatially varying mechanical properties, from tissue-like compliance to rigid, bone-like load-bearing capability [1].

According to the authors, the generation techniques allow more than 1 million discrete configurations and an infinite number of geometric variations [1]. Science et Vie, in its account of the work, adds that the lattice is 3D-printed from a flexible resin. Stiffness in different zones ranges from 20 to 280 kilopascals without changing material. The design rests on two elementary cells, body-centered cubic and "X-cube", whose combination gradually modulates how the material deforms.

## Elephant prototype

The robot is less than 60 centimeters tall. Its trunk is driven by four motors and tensioned wires. It bends, twists and rotates, and, as reported, can grip a wire 0.1 millimeter thick and lift a load of 500 grams. The hips, knees and feet remain firm and carry the body.

The joints integrate programmable bending profiles, and the trunk stays continuously soft [1]. By shifting and rotating the lattice cells, the researchers reproduce an ankle slide, a knee flexion and the twist of a toe, with smooth transitions between zones. Instead of joining different materials, the structure is made as one lightweight lattice.

The authors describe the approach as a scalable way to design lightweight, adaptable robots [1]. According to Science et Vie, the EPFL team is now working mainly on strengthening the cell walls, to obtain stiffer structures for exoskeletons and for arms that carry loads.

## Sources

1. [Science Advances](https://doi.org/10.1126/sciadv.adu9856)
2. [science-et-vie.com](https://www.science-et-vie.com/cerveau-et-intelligence/des-ingenieurs-americains-ont-cree-des-robots-qui-se-deforment-comme-une-trompe-delephant-et-pourraient-un-jour-travailler-dans-lespace-266450.html)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-6f3eb333554d84a29b3e92a3_epfl_prototype_robot/
