# DGIST cuts dysprosium use in Nd–Fe–B magnets by up to 80% with a redesigned diffusion source

- Published: 2026-11-16 03:00 UTC
- Section: Machines & Making › Materials science
- Tags: Nd–Fe–B permanent magnets, heavy rare-earth elements, dysprosium reduction, grain boundary diffusion process, coercivity, electric vehicle traction motors, wind turbine magnets, diffusion source composition, DGIST, Chemical Engineering Journal
- URL: https://realtech.media/news/rt-66331bdf7044e2d930cc744a_dgist_cuts_dysprosium/

**DGIST researchers redesigned the diffusion source for grain boundary diffusion in Nd–Fe–B magnets, keeping magnetic performance while using far less heavy rare-earth dysprosium.**

![DGIST cuts dysprosium use in Nd–Fe–B magnets by up to 80% with a redesigned diffusion source](https://realtech.media/media/2026/11/5fe7d75ce0c779db.jpg)
*File:Bar magnet.jpg: Photo taken by Aney / derivative work: MikeRun, Wikimedia Commons, CC BY-SA 3.0*

A research team led by Jeongmin Kim and Donghwan Kim of the Division of Nanotechnology at DGIST in Daegu has developed a materials design technology that reduces the waste of heavy rare-earth elements in high-performance permanent magnets. According to ResearchSEA, the team cut dysprosium (Dy) usage by as much as 80% compared with the conventional use of dysprosium alone, while keeping magnetic performance equivalent to the conventional method [1]. The results were published in Chemical Engineering Journal.

## Why heavy rare earths are the bottleneck

Neodymium–iron–boron (Nd–Fe–B) permanent magnets are key components in electric vehicle traction motors and wind turbines [1]. Heavy rare-earth elements are added to them to maintain coercivity, the resistance to demagnetization, at high temperatures. These elements are extremely expensive and have unstable supply chains, which places a significant burden on industry.

Completely eliminating heavy rare-earth elements remains difficult. The main technical task is therefore to minimize their use while maintaining magnetic performance.

## Grain boundary diffusion and the source redesign

The grain boundary diffusion process is widely used for this purpose. Heavy rare-earth elements are applied to the magnet surface and then diffused into the interior by heat treatment. They move along the boundaries of grains within the magnet and form thin shells on the grain surfaces, which enhances magnetic performance.

The problem arises when the elements do not diffuse uniformly and instead accumulate excessively in grains near the surface. The shells then become unnecessarily thick, and expensive material is wasted [1].

The team identified the causes of this excessive consumption and redesigned the composition of the diffusion source applied to the magnet surface. The new composition takes into account the proportion of light rare-earth elements in the base magnet. According to the researchers, this suppressed the excessive accumulation of heavy rare-earth elements near the surface and promoted thin, uniform shells on the grain surfaces, which raised the utilization efficiency of the heavy rare earths [1].

The authors say the work gives practical materials design guidelines for the problem. They also expect it to serve as a foundation for next-generation magnet manufacturing processes that use only inexpensive light rare-earth elements. Principal Researcher Jeongmin Kim said the team aims to extend the approach to light rare-earth-based processes.

## Sources

1. [ResearchSEA](https://www.asiaresearchnews.com/node/23693)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-66331bdf7044e2d930cc744a_dgist_cuts_dysprosium/
