# Novosibirsk State University patents a CO₂ sorbent regenerated at 90–100 °C; tested at 500 g scale

- Published: 2026-11-16 10:20 UTC
- Section: Machines & Making › Materials science
- Tags: CO₂ capture, carbon dioxide sorbent, Novosibirsk State University, regenerable absorber, styrene-divinylbenzene, polyethyleneimine, flue gas treatment, biogas purification, patent
- URL: https://realtech.media/news/rt-4bfd161558600bb0f9bc2a70_novosibirsk_state_university/

**NSU received a patent for a low-temperature regenerable CO₂ absorber. Per the author, it holds up to 17% of its own mass in CO₂ and passed pilot tests in a 1-litre adsorber.**

![Novosibirsk State University patents a CO₂ sorbent regenerated at 90–100 °C; tested at 500 g scale](https://realtech.media/media/2026/11/07971bab157c3805.jpg)
*Научная Россия*

Novosibirsk State University (NSU) has received a patent for a "low-temperature regenerable carbon dioxide absorber", according to Nauchnaya Rossiya. The author is Andrey Sheskovas, a research engineer at the NSU Center for New Functional Materials. The material is intended to capture CO₂ from gas mixtures, including industrial flue gas and biogas. [1]

After saturation, the sorbent can be heated, the carbon dioxide extracted, and the material reused for gas purification. According to the developer, it can retain up to 17% of its own mass in CO₂. [1]

## Composition and regeneration

The absorber is a composite of a porous support and an active component. The support is a meso-macroporous polymer matrix based on a styrene–divinylbenzene (SDVB) copolymer. Mesopores distribute the active component, while macropores serve as transport channels for CO₂. In the patented formulation SDVB makes up 50–80% of the mass, and the remainder is PEI. [1]

Sheskovas stated that the material can be heated to 90–100 degrees and its properties fully restored. During regeneration the CO₂ is released rather than destroyed. The recovered gas can be sent for conversion into useful products or for storage, depending on the emitting enterprise. [1]

## Synthesis and testing

Per the author, synthesis is simple: an alcohol solution of the active component is added to the porous matrix, followed by drying. [1]

The team recently scaled up the synthesis from the 1 g typical of laboratory work to 500 g. The material then underwent pilot tests in an adsorber with a 1-litre working volume. According to the developer, no decline in sorption characteristics was observed. [1]

The development has not yet reached industrial use, and the team is looking for industrial partners. A scientific paper on the material is in preparation. Further work should show how the absorber performs in the transition from a test installation to treating gas streams at enterprises. [1]

The information was provided by the NSU press service. [1]

## Sources

1. [Научная Россия](https://scientificrussia.ru/articles/sotrudnik-ngu-izobrel-material-dla-ulavlivania-co-iz-gazovyh-smesej)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-4bfd161558600bb0f9bc2a70_novosibirsk_state_university/
