# Nanjing University: lead-free CsSnI3 near-infrared LEDs reach 6304 W sr−1 m−2, T50 of 64.3 h

- Published: 2026-11-16 06:24 UTC
- Section: Machines & Making › Electronics
- Tags: CsSnI3 perovskite LED, near-infrared LED, lead-free perovskite, tin-based perovskite, LED radiance, half-lifetime T50, night-vision imaging, biomedical imaging, solution-processed optoelectronics
- URL: https://realtech.media/news/rt-1f782312dc49decb8ef65f58_nanjing_university_lead/

**Laboratory lead-free CsSnI3 perovskite LEDs emit in the near-infrared at 6304 W sr−1 m−2 under DC drive; the authors report a record for tin-based NIR perovskite LEDs.**

![Nanjing University: lead-free CsSnI3 near-infrared LEDs reach 6304 W sr−1 m−2, T50 of 64.3 h](https://realtech.media/media/2026/11/063fac088176a890.jpg)
*David from Colorado Springs, United States, Wikimedia Commons, CC BY 2.0*

Researchers at the School of Physics, Nanjing University, with a co-author from Linköping University in Sweden, have reported lead-free light-emitting diodes based on CsSnI3 perovskite that emit in the near-infrared. The paper was published in Nature Communications on 14 November 2026. The devices reached a radiance of 6304 W sr−1 m−2 under DC drive and 21,633 W sr−1 m−2 under pulsed drive [1].

Operational stability was measured as a half-lifetime (T50) of 64.3 h at a current density of 100 mA cm−2 [1]. According to the authors, the combination of radiance and stability is a record for near-infrared tin-based perovskite LEDs and a substantial advance for solution-processed NIR optoelectronics [1]. These are laboratory devices, not commercial products.

## Why planar NIR emitters matter

Invisible near-infrared light sources are used in optoelectronic and bioelectronic systems, including night-vision imaging, facial recognition and non-invasive biomedical sensing [1]. The authors note that realizing planar NIR emitters with high output optical power remains a major challenge [1]. The work addresses this with a tin-based, lead-free perovskite emitter.

## Hemispherical perovskite microstructures

The authors attribute the results to the spontaneous formation of discrete hemispherical perovskite microstructures. According to them, these structures improve optical and thermal management at the same time [1]. The radiance under DC and pulsed driving, as well as the half-lifetime, were reported for these devices [1].

The team also demonstrated large-area planar LEDs for red-glow-free night-vision surveillance, biomedical imaging and sensing [1]. Yuhan Zhou, Yangyu Liu and Chunping Pu contributed equally to the work, and the corresponding author is Chunxiong Bao. The authors describe the result as a viable route toward high-radiance, stable and lead-free NIR light sources, and toward scalable perovskite-based optoelectronic and bioelectronic technologies [1].

## Sources

1. [Nature Communications](https://doi.org/10.1038/s41467-026-78951-6)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-1f782312dc49decb8ef65f58_nanjing_university_lead/
