# Mixed-dimensional CMOS of MoS2 and carbon nanotubes: inverters under 1 pW, 19 ps delay

- Published: 2026-11-16 19:23 UTC
- Section: Machines & Making › Electronics
- Tags: mixed-dimensional CMOS, molybdenum disulfide transistors, aligned carbon nanotubes, rail-to-rail inverter, static power below 1 pW, 19 ps stage delay, 180 nm area-equivalent SRAM, 4-bit full adder, low-power electronics
- URL: https://realtech.media/news/rt-1e263959d64741a59053078b_mixed_dimensional_cmos/

**Researchers built laboratory CMOS circuits from single-crystal MoS2 n-type and aligned carbon nanotube p-type transistors, including SRAM and a 4-bit full adder.**

![Mixed-dimensional CMOS of MoS2 and carbon nanotubes: inverters under 1 pW, 19 ps delay](https://realtech.media/media/2026/11/3d2cd55c034fd0d4.jpg)
*KenShirriff, Wikimedia Commons, CC BY-SA 4.0*

Researchers have reported a mixed-dimensional complementary metal–oxide–semiconductor (CMOS) technology that combines two-dimensional single-crystal molybdenum disulfide n-type transistors with one-dimensional aligned carbon nanotube p-type transistors, according to a paper available through doi.org [1]. On this platform the authors fabricated laboratory inverters, static random-access memory (SRAM) and basic logic circuits, up to a 4-bit full adder [1]. These are experimental circuits, not a commercial process.

## Complementary integration of nanomaterials

Low-dimensional semiconductors, such as one-dimensional carbon nanotubes and two-dimensional transition metal dichalcogenides, could be used to build scaled, energy-efficient electronic devices [1]. Each material can show excellent unipolar device performance. However, complementary integration with balanced performance and low power consumption remains a challenge, the authors state [1].

To address this, the team integrated enhancement-mode top-gate transistors with symmetric threshold voltages for both polarities [1]. They achieved this with a hard mask technology and a pre-deposition annealing process [1]. The molybdenum disulfide devices serve as the n-channel and the carbon nanotube devices as the p-channel [1].

## Inverters, memory and logic

The CMOS inverters exhibit rail-to-rail operation, with a peak static power of less than 1 pW and a single-stage delay of 19 ps [1]. The authors also fabricated SRAM at an area equivalent to the 180 nm node. According to the paper, it offers robust read–write operations with a noise margin of 22% and 40% operating voltage [1].

The uniformity of the transistors and inverters also allowed the authors to create basic logic gates and a 4-bit full adder [1]. Together, these results show that the two material systems can be combined in one complementary circuit platform, from single inverters to arithmetic and memory blocks, at the laboratory stage [1].

## Sources

1. [doi.org](https://doi.org/10.1038/s41928-026-01737-7)
2. [bioengineer.org](https://bioengineer.org/mixed-dimensional-cmos-integrates-molybdenum-disulfide-and-carbon-nanotubes-for-low-power)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-1e263959d64741a59053078b_mixed_dimensional_cmos/
