# TU Berlin and Miebach develop timber-granite composite bridge; two 15 m bridges planned in Spandau

- Published: 2026-11-18 14:40 UTC
- Section: Machines & Making › Construction
- Tags: timber-granite bridge, composite bridge, TU Berlin, Miebach engineering office, DBU funding, pedestrian and cycle bridge, Spandau, epoxy adhesive, circular construction, CO2 emissions in construction
- URL: https://realtech.media/news/rt-0aa6e909f7975e5adc27bd18_tu_berlin_and/

**The design, funded by DBU with about 140,000 euros, protects the timber beam with a granite deck. According to the developers, its lifespan is three to five times longer.**

![TU Berlin and Miebach develop timber-granite composite bridge; two 15 m bridges planned in Spandau](https://realtech.media/media/2026/11/b520023f46bd9467.jpg)
*Godotto, Wikimedia Commons, CC BY-SA 4.0*

The Technical University of Berlin (TU Berlin) and the engineering office Miebach have developed a composite bridge made of timber and granite, described as the first of its kind, according to a DBU press release published on presseportal.de [1]. The German Federal Environmental Foundation (DBU) funded the project with about 140,000 euros [1]. The Miebach office, based in Lohmar (North Rhine-Westphalia), is now planning two pedestrian and cycle bridges of this design in Berlin's Spandau district [1]. They will replace two old, dilapidated timber bridges and are to be about 15 metres long [1].

## Granite deck protects the timber

Dr.-Ing. Volker Schmid, head of a department at the Institute of Civil Engineering at TU Berlin, says the main problem of plain, unprotected timber bridges is their shorter lifespan [1]. In the new design, granite slabs form the part that is walked or driven on. The slabs are joined to each other watertight with a high-strength epoxy adhesive, which creates a weatherproof, dense deck over the timber [1]. Because the timber beam narrows toward the bottom, the wood stays dry even in driving rain. According to Schmid, the bridge therefore reaches three to five times the lifespan of a timber bridge [1].

## Joint, reuse and emissions

The two materials have very different properties, so joining them was the hardest part of the work, Schmid says. The solution uses granite slabs of alternating thickness that interlock with the timber beam, and additional screws prevent a slab from lifting off [1]. Once the screws are released, the slabs and the beam can be taken apart by material type and reused in other construction projects [1].

Compared with the concrete slab of existing timber-concrete bridges, granite has a considerably higher load capacity and carries high loads even at small thicknesses, according to Schmid [1]. Concrete production causes large CO2 emissions, which largely do not arise with granite [1]. Schmid says this also allows a slimmer bridge than a timber-only one [1].

Medium-sized companies, including Kusser Granitwerke and Schaffitzel Holzindustrie GmbH, took part in the development [1]. DBU officer Sabine Djahanschah says the plans could serve as a model for future projects across Germany [1].

## Sources

1. [presseportal.de](https://www.presseportal.de/pm/6908/6392801)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-0aa6e909f7975e5adc27bd18_tu_berlin_and/
