# Bluetooth SIG adopts HDT in Core 7.0: LE speed rises from 2 to 7.5 Mbps, devices due from 2027

- Published: 2026-11-16 20:30 UTC
- Section: Digital & Computing › Connectivity & internet
- Tags: Bluetooth Core 7.0, High Data Throughput, Bluetooth LE 7.5 Mbps, Bluetooth SIG, HDT PHY, 16QAM modulation, lossless Bluetooth audio, LC3 codec, FastConnect 8800, RTL8773J
- URL: https://realtech.media/news/rt-0482172e893e1746ff1f6690_bluetooth_sig_adopts/

**The Bluetooth SIG added High Data Throughput to Core 7.0 on 4 November 2026. It requires new radio hardware at both ends, and first products are expected from 2027.**

![Bluetooth SIG adopts HDT in Core 7.0: LE speed rises from 2 to 7.5 Mbps, devices due from 2027](https://ecosistemastartup.com/wp-content/uploads/2026/11/bluetooth-7-0-alta-velocidad-iot-1200x675.jpg)
*ecosistemastartup.com*

According to ecosistemastartup.com, the Bluetooth Special Interest Group (SIG) adopted a feature called High Data Throughput (HDT) within Bluetooth Core 7.0 on 4 November 2026. With it, the maximum speed of Bluetooth Low Energy (LE) rises from 2 Mbps to 7.5 Mbps [1]. The 2 Mbps rate dates back to Bluetooth 5.0 in 2016. The SIG expects the first compatible products from 2027 [1].

## Physical layer and requirements

The increase does not come from additional spectrum. HDT introduces a new physical layer (PHY) in the same 2.4 GHz band. According to audioXpress, it uses the modulation schemes π/4 QPSK, 8PSK and 16QAM combined with forward error correction (FEC) [1].

HDT defines five rates: 2, 3, 4, 6 and 7.5 Mbps. The first three are mandatory for any HDT device, while 6 and 7.5 Mbps are optional, and a device that supports 7.5 Mbps must also support 6 Mbps [1]. A product can therefore carry the "Bluetooth 7" label without HDT, or support HDT only up to 4 Mbps.

HDT does not arrive through a firmware update: it requires a new radio architecture, and both ends of the connection must support it [1]. Qualcomm announced the FastConnect 8800 chip at MWC 2026, described as the first mobile chip with Wi-Fi 8 and Bluetooth 7 support, according to Android Headlines. Realtek showed its RTL8773J audio SoC with HDT at COMPUTEX 2026, and Ceva is working with Actions Technology on the ATS296X family [1].

## Audio, codec and limits

Today, high-resolution audio over Bluetooth relies on proprietary technologies such as Sony's LDAC or Qualcomm's aptX Lossless. Android Authority notes that typical wireless streams run from 200 kbps to slightly over 1 Mbps. The same publication calculates that 16-bit/44.1 kHz audio needs about 1.4 Mbps, 24-bit/96 kHz about 4.6 Mbps, and 24-bit/192 kHz about 9.2 Mbps, the last reachable only with efficient lossless compression [1].

HDT is only a transport layer, and audio also needs a codec. LC3, the default LE Audio codec, was designed for low power consumption and is lossy [1]. The SIG has a lossless high-resolution codec project under way, with formal interoperability tests planned for March 2027 and a possible final specification later in 2027. The technology under evaluation has not been publicly confirmed [1].

The SIG points to wearables, virtual and augmented reality glasses, and smart home devices. Damon Barnes, the SIG's technical marketing director, told CNET that a smartwatch could sync hours of training data in seconds [1]. HDT does not improve range or sensor accuracy, does not help devices that send little data, such as heart-rate straps, and does not speed up pairing, since the first version does not change device advertising [1].

## Sources

1. [ecosistemastartup.com](https://ecosistemastartup.com/bluetooth-7-0-hdt-sube-la-velocidad-a-75-mbps-en-2027)

---

Source: RealTech, realtech.media — https://realtech.media/news/rt-0482172e893e1746ff1f6690_bluetooth_sig_adopts/
